EasyManuals Logo

NETGEAR ProSafe GSM7224 User Manual

NETGEAR ProSafe GSM7224
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 8-39
202-10009-01_060204
monitor session mode
This command configures the monitor session (port monitoring) mode to enable. The probe and
monitored ports must be configured before monitor session (port monitoring) can be enabled. If
enabled, the probe port will monitor all traffic received and transmitted on the physical monitored
port. It is not necessary to disable port monitoring before modifying the probe and monitored
ports.
Default Disabled
Format
monitor session mode
Mode Global Config
no monitor session mode
This command sets the monitor session (port monitoring) mode to disable.
Format
no monitor session mode
Mode Global Config
port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Disabled
Format port lacpmode
Mode Interface Config
no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
no port lacpmode
Mode Interface Config
port lacpmode all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format
port lacpmode all
Mode Global Config

Table of Contents

Other manuals for NETGEAR ProSafe GSM7224

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSafe GSM7224 and is the answer not in the manual?

NETGEAR ProSafe GSM7224 Specifications

Performance Specifications IconPerformance Specifications
forwarding modesStore-and-forward
bandwidth48 Gbps
switch latencyLess than 20 microseconds for 64-byte frames
system memory64 MB
packet buffer memory122 KB embedded memory per port
code storage8 MB
address database size8, 000 MAC addresses
addressing48-bit MAC address
number of VLANs228
number of trunks6
number of queues4
acoustic noise60 dB
heat dissipation28.24 Btu/hr
mean time between failure58, 300 hours
Electrical Specifications IconElectrical Specifications
power consumption36 W
input voltage100-240VAC
input frequency50-60 Hz
Physical Specifications IconPhysical Specifications
width440 mm
depth257 mm
height43 mm
Environmental Specifications IconEnvironmental Specifications
operating temperature0 to 40° C
storage temperature-20 to 70° C
operating humidity90% maximum relative humidity
storage humidity95% maximum relative humidity
operating altitude10, 000 ft
storage altitude10, 000 ft

Related product manuals