NETGEAR ProSafe GSM7224

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 8-29
202-10009-01_060204
Default The default private and public communities are enabled by
default. The four undefined communities are disabled by default.
Format
snmp-server community mode <name>
Mode Global Config
no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP requests
using this community are accepted. In this case the SNMP manager associated with this
community cannot manage the switch until the Status is changed back to Enable.
Format
no snmp-server community mode <name>
Mode Global Config
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also called
public).
Format
snmp-server community ro <name>
Mode Global Config
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also called
private).
Format
snmp-server community rw <name>
Mode Global Config
snmp-server enable traps
This command enables the Authentication Flag.
Default
Enabled
Format snmp-server enable traps
Mode Global Config