EasyManuals Logo

NETGEAR ProSafe GSM7224 User Manual

NETGEAR ProSafe GSM7224
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
9-6 DHCP Server Commands
202-10009-01_060204
network
This command is used to configure the subnet number and mask for a DHCP address pool on the
server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The
prefix-length is an integer from 0 to 32.
Default None
Format network <networknumber> [mask | prefixlength]
Mode DHCP Pool Config
no network
This command removes the subnet number and mask.
Format no network
Mode DHCP Pool Config
service dhcp
This command enables the DHCP server and relay agent features on the router.
Default Disabled
Format service dhcp
Mode Global Config
no service dhcp
This command disables the DHCP server and relay agent features.
Format no service dhcp
Mode Global Config
DHCP Server Show Commands
These commands display the DHCP Server address bindings, and statistics.

Table of Contents

Other manuals for NETGEAR ProSafe GSM7224

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSafe GSM7224 and is the answer not in the manual?

NETGEAR ProSafe GSM7224 Specifications

Performance Specifications IconPerformance Specifications
forwarding modesStore-and-forward
bandwidth48 Gbps
switch latencyLess than 20 microseconds for 64-byte frames
system memory64 MB
packet buffer memory122 KB embedded memory per port
code storage8 MB
address database size8, 000 MAC addresses
addressing48-bit MAC address
number of VLANs228
number of trunks6
number of queues4
acoustic noise60 dB
heat dissipation28.24 Btu/hr
mean time between failure58, 300 hours
Electrical Specifications IconElectrical Specifications
power consumption36 W
input voltage100-240VAC
input frequency50-60 Hz
Physical Specifications IconPhysical Specifications
width440 mm
depth257 mm
height43 mm
Environmental Specifications IconEnvironmental Specifications
operating temperature0 to 40° C
storage temperature-20 to 70° C
operating humidity90% maximum relative humidity
storage humidity95% maximum relative humidity
operating altitude10, 000 ft
storage altitude10, 000 ft

Related product manuals