User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
B-8 Cabling Guidelines
202-10009-01_060204
Table 9-2. 100/1000 Mbps RJ-45 Plug and RJ-45 Connector Pin Assignments
Conclusion
For optimum performance of your 1000BASE-T product, it is important to fully qualify your cable
installation and ensure it meets or exceeds ANSI/EIA/TIA-568-A:1995 or ISO/IEC 11801:1995
Category 5 specifications. Install Category 5e cable where possible, including patch panel cables.
Minimize transition points, jacket removal, and untwist lengths. Bundling of cables must be
properly installed to meet the requirements in ANSI/EIA/TIA-568A-3.
PIN CHANNEL DESCRIPTION
1
2
A Rx/Tx Data +
Rx/Tx Data
3
6
B Rx/Tx Data +
Rx/Tx Data
4
5
C Rx/Tx Data +
Rx/Tx Data
7
8
D Rx/Tx Data +
Rx/Tx Data
To Next Page
Loading...
