NETGEAR ProSafe GSM7224

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
8-16 Switching Commands
202-10009-01_060204
LAG/Port-Channel (802.3ad) Commands
port-channel staticcapability
This command enables the support of port-channels (static link aggregations - LAGs) on the
device. By default, the static capability for all port-channels is disabled.
Default Disabled
Format
port-channel staticcapability
Mode Global Config
no port-channel staticcapability
This command disables the support of static port-channels (link aggregations - LAGs) on the
device.
Default Disabled
Format
no port-channel staticcapability
Mode Global Config
show port-channel brief
This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Format
show port-channel brief
Mode Privileged EXEC and User EXEC
Static Capability This field displays whether or not the device has static capability
enabled.
For each port-channel the following information is displayed:
Name This field displays the name of the port-channel.
Link State This field indicates whether the link is up or down.
Mbr Ports This field lists the ports that are members of this port-channel, in
slot/port notation.
Active Ports This field lists the ports that are actively participating in this port-
channel.