User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
4-2 Web-Based Management Interface
202-10009-01_060204
• Device Management Introduction of the basic icons and management of the device
• Interface Operations Describes Web browser requirements, and common commands
• Product Overview Describes supported SNMP and Web management features
• Summary of Features Feature List
How to Log In to the Managed Switch
The NETGEAR 7200 Series Layer 2 Managed Switch can be configured remotely from Microsoft
Internet Explorer browser version 5.0 or above, or Netscape Navigator web browser version 4.78
or above.
1. Determine the IP address of your managed switch.
2. Open a Web browser such as Internet Explorer or Netscape Navigator.
3. Log in to the managed switch using whatever IP address the unit is currently configured with.
Use the default user name of admin and default of no password, or whatever LAN address and
password you have set up.
.
Figure 4-2: 7200 IP address in browser address bar
A login window opens:
Click the Login link.
To Next Page
Loading...
