NETGEAR ProSafe GSM7224

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 8-15
202-10009-01_060204
Mode Global Config
Management VLAN Commands
network mgmt_vlan
This command configures the Management VLAN ID.
Default 1
Format
network mgmt_vlan <1-4094>
Mode Privileged EXEC
Dot1P Commands
vlan port priority all
This command configures the port priority assigned for untagged packets for all ports presently
plugged into the device. The range for the priority is 0-7. Any subsequent per port configuration
will override this configuration setting.
Format
vlan port priority all <priority>
Mode Global Config
vlan priority
This command configures the default 802.1p port priority assigned for untagged packets for a
specific interface. The range for the priority is 0-7
Default
0
Format vlan priority <priority>
Mode Interface Config