NETGEAR ProSafe GSM7224

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
A-4 IS CLI Mapping
202-10009-01_060204
Global
Config
no snmp-server enable traps
stpmode
Switching config telnet maxsessions <0-5> Privileged
EXEC
remotecon maxsessions <0-5>
Privileged
EXEC
no remotecon maxsessions
Switching config telnet mode <enable |
disable>
Privileged
EXEC
telnet
Privileged
EXEC
no telnet
Switching config telnet timeout <0-160> Privileged
EXEC
remnotecon timeout <0-160>
Privileged
EXEC
no remotecon timeout
Switching config forwardingdb agetime
<10-1,000,000> [fdbid/all]
Global
Config
bridge aging-time <10-1000000>
{<1-4094> | all}
Global
Config
no bridge aging-time {<1-4094> | all}
Switching show spanningtree summary Privileged
EXEC and
User
EXEC
show spanning-tree summary
Switching show spanningtree port <slot/port> Privileged
EXEC and
User
EXEC
show spanning-tree interface <slot/
port>
Switching show spanningtree cst detailed Privileged
EXEC and
User
EXEC
show spanning-tree
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax