NETGEAR ProSafe GSM7224 - Page 192

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
A-16 IS CLI Mapping
202-10009-01_060204
Switching config vlan port tagging <enable |
disable> <1-4094> <slot/port | all>
Interface
Config
vlan tagging <1-4094>
Interface
Config
no vlan tagging <1-4094>
Global
Config
vlan port tagging all <1-4094>
Global
Config
no vlan port tagging all <1-4094>
Switching config vlan port pvid <1-4094>
<slot/port | all>
Interface
Config
vlan pvid <1-4094>
Global
Config
vlan port pvid all <1-4094>
Switching config vlan port acceptframe <all |
vlan> <slot/port | all>
Interface
Config
vlan acceptframe {vlanonly | all}
Interface
Config
no vlan acceptframe
Global
Config
vlan port acceptframe all {vlanonly |
all}
Global
Config
no vlan port acceptframe all
Switching config vlan port ingressfilter
<enable | disbale> <slot/port | all>
Interface
Config
vlan ingressfilter
Interface
Config
no vlan ingressfilter
Global
Config
vlan port ingressfilter all
Global
Config
no vlan port ingressfilter all
Switching config protocol create
<groupname>
Global
Config
vlan protocol group <groupname>
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax