User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
A-18 IS CLI Mapping
202-10009-01_060204
Switching config garp gvrp adminmode
<enable | disable>
Privileged
EXEC
set gvrp adminmode
Privileged
EXEC
no set gvrp adminmode
Switching config garp gvrp interfacemode
<slot/port | all> <enable | disable>
Interface
Config
set gvrp interfacemode
Interface
Config
no set gvrp interfacemode
Global
Config
set gvrp interfacemode all
Global
Config
no set gvrp interfacemode all
Switching config garp jointimer <slot/port/all>
<10-100>
Interface
Config
set garp timer join <10-100>
Interface
Config
no set garp timer join
Global
Config
set garp timer join all <10-100>
Global
Config
no set garp timer join all
Switching config garp leavetimer <slot/port/
all> <20-600>
Interface
Config
set garp timer leave <20-600>
Interface
Config
no set garp timer leave
Global
Config
set garp timer leave all <20-600>
Global
Config
no set garp timer leave all
Switching config garp leavealltimer <slot/port/
all> <200-600>
Interface
Config
set garp timer leaveall <200-6000>
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax
To Next Page
Loading...
