NETGEAR ProSafe GSM7224 - Page 199

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
IS CLI Mapping A-23
202-10009-01_060204
Interface
Config
no dot1x port-control
Security config dot1x port quietperiod <slot/
port> <0-65535>
Interface
Config
dot1x timeout {{reauth-period
<seconds>} | {quiet-period
<seconds>} | {tx-period <seconds>} |
{supp-timeout <seconds>} |
{server-timeout <0-65535>}}
Security config dot1x port transmitperiod
<slot/port> <1-65535>
Interface
Config
no dot1x timeout {reauth-period |
quiet-period | tx-period | supp-timeout
| server-timeout}
Security config dot1x port supptimeout
<slot/port> <1-65535>
Interface
Config
Security config dot1x port servertimeout
<slot/port> <1-65535>
Interface
Config
Security config dot1x port reauthperiod
<slot/port> <1-65535>
Interface
Config
Security config dot1x port maxrequests
<slot/port> <1-10>
Interface
Config
dot1x max-req <1-10>
Interface
Config
no dot1x max-req
Security config dot1x port reauthenabled
<slot/port> <true/false>
Interface
Config
dot1x re-authentication
Interface
Config
no dot1x re-authentication
Security config dot1x defaultlogin
<listname>
Global
Config
dot1x defaultlogin <listname>
Security config dot1x login <user>
<listname>
Global
Config
dot1x login <user> <listname>
Security config dot1x port users add <user>
<slot/port/all>
Global
Config
dot1x user <user> {<slot/port> | all}
Security config dot1x port users remove
<user> <slot/port/all>
Global
Config
no dot1x user <user> {<slot/port> |
all}
Table 9-1. IS CLI Mapping (continued)
Package 7200 Series L2 Switch Command
CLI Command
Mode Syntax