NETGEAR ProSafe XS728T User Manual

Configure Switching
113
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Voice VLAN > Advanced > Port Setting.
6. Select which type of interfaces display onscreen:
• To display physical ports only, click the PORTS link.
• To display LAGs only, click the LAGS link.
• To display both physical ports and LAGs, click the All link.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface, or
type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row.
8. From the Voice VLAN Mode menu, select one of the following options:
• Enable. Adds the selected interfaces to the voice VLAN.
• Disable. Removes the selected interfaces from the voice VLAN. The default is
Disable.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The Membership field displays whether the current operational status of the voice VLAN
on the interface is active or not.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English