EasyManuals Logo
Home>NETGEAR>Switch>ProSafe XS728T

NETGEAR ProSafe XS728T User Manual

NETGEAR ProSafe XS728T
373 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Configure Switching
141
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
If the address exists, the entry is displayed. An exact match is required.
The following table describes the information in the IGMP snooping table.
Modify IGMP Snooping Settings for a VLAN
 To modify IGMP snooping settings for a VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > IGMP Snooping > IGMP Snooping VLAN Configuration.
The IGMP Snooping VLAN Configuration page displays.
6. Select the check box for the VLAN ID.
7. Update the values.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Table 36. IGMP Snooping Table information
Field Description
MAC Address The multicast MAC address for which the switch holds forwarding information,
filtering information, or both. The format is six 2-digit hexadecimal numbers that
are separated by colons, for example, 01:00:5e:45:67:89.
VLAN ID The VLAN for which the switch holds forwarding and filtering information.
Type The type of the entry. Static entries were manually configured. Dynamic entries
were added to the table as a result of a learning process or protocol.
Description The text description for the multicast table entry. Possible values are
Management Configured, Network Configured, and Network Assisted.
Interface The interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the
associated address.

Table of Contents

Other manuals for NETGEAR ProSafe XS728T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSafe XS728T and is the answer not in the manual?

NETGEAR ProSafe XS728T Specifications

General IconGeneral
BrandNETGEAR
ModelProSafe XS728T
CategorySwitch
LanguageEnglish

Related product manuals