NETGEAR ProSafe XS728T User Manual

Configure Routing
191
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Change the Settings for an IPv6 Prefix for Advertisement on
an IPv6 VLAN
You can change the settings for a prefix for advertisement on an IPv6 VLAN.
 To change the settings for an IPv6 prefix for advertisement on an IPv6 VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> IPv6 > Advanced > Prefix Configuration.
The IPv6 Interface Selection page displays. The page also shows the IPv6 Interface
Configuration table.
6. From the Interface menu, select the VLAN.
7. Select the check box for the IPv6 prefix.
The settings display in the fields in the table heading.
8. Change the settings as needed.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Remove an IPv6 Prefix From an IPv6 VLAN
You can remove one or more IPv6 prefixes from an IPv6 VLAN. You cannot remove the
default IPv6 prefix.
 To remove one or more IPv6 prefixes from an IPv6 VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.

NETGEAR ProSafe XS728T Specifications

General

Brand	NETGEAR
Model	ProSafe XS728T
Category	Switch
Language	English