Configure System Information
58
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Summary.
6. To refresh the page, click the Update button.
The following table describes the nonconfigurable fields.
Table 14. Green Ethernet Statistics Summary information
Field Description
Cumulative Energy Saving
(Watts*Hours)
Estimated cumulative energy saved in watts * hours when all green
modes are enabled.
Interface Interface for which data is displayed or configured.
Energy Detect Admin mode Enable or disable Energy Detect mode on the port. When this mode is
enabled, when the port link is down, the PHY automatically goes down
for a short period of time, then wakes up to check link pulses. This
allows the switch to perform autonegotiation and save power
consumption when no link partner is present.
Energy Detect Operational Status Current operational status of the Energy Detect mode.
To Next Page
Loading...
Need help?
General