NETGEAR RT328 - Page 65

Index 1
Numbers
10BASE-T network, 2-3
A
A/B Adapter field, ISDN Menu tab, 5-8
Active field
ISP Menu tab, 5-12
Remote Node Menu tab, 5-14
Static Routes Menu tab, 5-23
User Profiles, 5-21
addresses, gateway, 1-4
Advanced configuration, 3-5, 5-1
Advanced Router Configuration menu bar
commands, 5-2
Allow user to provide IP address field,
Dial-in Menu tab, 5-20
Analog Call Routing field, ISDN Menu tab,
5-8
AUI port, 2-4
Authentication field, Dial-in Menu tab, 5-19
B
Bandwidth on Demand field, Remote Node
Configuration Continued Menu tab, 5-17
C
Call Direction field, Remote Node Menu tab,
5-14
Call Profile Screen, 4-6
Call this phone number field, User Profiles,
5-21
Call Type field, Remote Node Configuration
Continued Menu tab, 5-17
Callback field, User Profiles, 5-21
calling line identification, 1-3
Can provide IP address from pool field,
Dial-in Menu tab, 5-20
checklists, 1-2
CLID field, Dial-in menu tab, 5-19
CLID Number field, User Profiles, 5-21
CLID. See also calling line identification
coaxial cable, 2-3
Compression field, Remote Node
Configuration Continued Menu tab, 5-17
configuration
for Internet access, 4-1
using FirstGear, 3-1
conventions, xii
copy command, Advanced Configuration
Menu Bar, 5-2
crossover cable, 2-3
customer support, iii
cut command, Advanced Configuration
Menu Bar, 5-2
Index
RT328.BK Page 1 Wednesday, August 6, 1997 11:14 AM