Network Settings
30
Outdoor High Power Wireless N Access Point
• Primary accounting server
• Seco
ndary accounting server
The primary servers are used by default. If the primary
server fails, the secondary server is
used if it is configured.
To configure RADIUS server settings:
1. Laun
ch a web browser on the computer that is connected to the access point.
2. In
the address field of the browser, enter http://192.168.0.100.
A login prompt displays.
3. Enter th
e user name and password.
The user name is ad
min and the default password is password.
The General screen displays.
4. Select Co
nfiguration > Security > Advanced > Radius Server Settings.
5. Complete the fields for each RADIUS server that the access point must communicate with
for authentication.
6. In
the Re-authentication Time (Seconds) field, specify the time interval in seconds after
which the supplicant will be authenticated again with the RADIUS server.
The default interval is 3600 seconds.
7. T
o allow the global key to be changed according to the specified time interval, leave the
Update Global Key Every (Seconds) check box selected.
8. T
o specify the time interval, enter the number of seconds in the Update Global Key Every
(Seconds) field.
The default interval is 1800 seconds.
9. Click the Appl
y button at the bottom of the screen.
Your settings are saved.
To Next Page
Loading...
Need help?
General
