Manage the Access Point
50
Outdoor High Power Wireless N Access Point
Enable a Syslog Server
You can enable the syslog option if your LAN includes a syslog server.
To enable a syslog server:
1. Laun
ch a web browser on the computer that is connected to the access point.
2. In
the address field of the browser, enter http://192.168.0.100.
A login prompt displays.
3. Enter th
e user name and password.
The user name is ad
min and the default password is password.
The General screen displays.
4. Select Co
nfiguration > System > Advanced > Syslog.
5. Select the Enable Syslog check box.
6. In
the Syslog Server IP Address field, type the IP address of your syslog server.
The access point sends all the syslog files to th
e specified IP address if the syslog option
is enabled.
7. In
the Port Number field, type the port number that your syslog server is configured to
use.
The default port number is 514.
8. Click the Appl
y button at the bottom of the screen.
Your settings are saved.
To Next Page
Loading...
Need help?
General
