Manage the Access Point
46
Outdoor High Power Wireless N Access Point
Set Up SNMP
Enable SNMP to allow the SNMP network management software, such as HP OpenView, to
manage the wireless access point by using the SNMPv1/v2 protocol.
To set up SNMP:
1. Laun
ch a web browser on the computer that is connected to the access point.
2. In
the address field of the browser, enter http://192.168.0.100.
A login prompt displays.
3. Enter th
e user name and password.
The user name is ad
min and the default password is password.
The General screen displays.
4. Select Maintenance
> SNMP.
5. Leave the SNMP Enable radio button selected.
6. S
pecify the settings:
• Read-Only Commu
nity Name. The public community string to allow the SNMP
manager to read the wireless access point’s MIB objects.
• Read-W
rite Community Name. The private community string to allow the SNMP
manager to read and write the wireless access point’s MIB objects.
• T
rap Community Name. The community name that is associated with the IP address
to receive traps.
• IP Add
ress to Receive Traps. The IP address of the SNMP manager to receive traps
sent from the access point.
7. Click the Appl
y button at the bottom of the screen.
Your settings are saved.
To Next Page
Loading...
Need help?
General
