Manage the Access Point
49
Outdoor High Power Wireless N Access Point
4. Select Maintenance > Restore Settings.
5. Click the Choose File button.
You are prompted to select a file where you
previously saved configuration settings.
6. Select the
file.
7. Click the Res
tore button.
The file uploads and the access point reboots.
Restore the Factory Default Settings
You can restore the access point to the factory default settings using the Restore Defaults
menu selection, or using the Reset button. See Factory Settings on p
age 62.
To restore the factory settings:
1. L
aunch a web browser on the computer that is connected to the access point.
2. In the address
field of the browser, enter http://192.168.0.100.
A login prompt displays.
3. Ente
r the user name and password.
The user name is adm
in and the default password is password.
The General screen displays.
4. Select Main
tenance > Reset > Restore Defaults.
5. Select the Yes radio button.
6. Click the Ap
ply button at the bottom of the screen.
The access point password is password, the access point DHCP client is enabled, the default
L
AN IP address is 192.168.0.100, and the access point name is reset to the name printed on
the product label.
To Next Page
Loading...
Need help?
General
