BA 3001 En – Edition 2.0 * * 345001b540.fm 5-31
Maintenance
5.13 Maintenance plan (overview)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the
attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Maintenance
work
( once a day)
Every 50 s/h
Every 250 s/h
Every 500 s/h
Once a year or
after 1000 s/h
After 1500 s/h
Customer
Fluid and filter changes ( ):
Carry out the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●●
• Engine oil filter
2
●●
• Fuel filter
3
●●
• Air filter element ●
•Coolant ●
• Hydraulic oil filter insert
4
●●
• Hydraulic oil ●
• Hydraulic oil tank breather ●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil ●●
• Engine coolant ●●
• Hydraulic oil ●●
Clean the water ducts
5
●
Check cooler for engine and hydraulic oil for contamination. Clean if necessary
●●
Check cooling systems, heating and hoses for leaks and pressure (visual check)
●●
Air filter (damage)
●●
Check the air filter, clean if necessary
●●
Prefilter with water separator: drain water
●●
• Clean ●
Check V-belt condition and tension
●●
Check V-belt condition and tension
●●
Check exhaust system for damage and condition
●●
Check valve tip clearance. Adjust if necessary
●
Fuel injection pump
●
Injection and pressure
●
Maintenance
To Next Page
Loading...