126
SECTION 10 − ENGINE − CHAPTER 1
603.54.471.00 − 11 − 2004
ADJUSTING VALVE CLEARANCE
(Operation 10 106 12)
1. Disconnect the battery negative cable.
2. Attach lifting chains to the bonnet (1) and then at-
tach them to the hoist.
WARNING
Always use suitable tools to align holes in parts.
NEVER USE YOUR FINGERS OR HANDS.
262
24872
1
3. Disconnect the electrical leads (1) from
headlamps (2).
263
24873
1
2
4. Detach the gas struts (1) from the bonnet.
264
1
TRE0603A
5. Remove the four bonnet hinge bolts (1) and lift
the bonnet clear.
265
1
TRE0604A
To Next Page
Loading...
Need help?
General
