New Holland TD60D - Starter Motor Removal and Re-Installation

7
SECTION 55 -- ELECTRICAL SYSTEM -- CHAPTER 3
603.54.471.00 -- 11 -- 2004
8
STARTER MOTOR REMOVAL AND
RE--INSTALLATION (Fig. 8) (Op. 55 201 50)
1. Disconnect negative battery cable.
2. Unscrew the nut and bolt (1) and remove the
protection cover (2) from starter motor (3).
3. Unscrew the nut and remove power clamp (5)
and emergency switch clamp (4).
4. Remove the starter motor securing bolts (6)
and remove the starter motor.
5. To re--install the starter motor , reverse the
order of removal.
26634
6
1
5
4
2 3