EasyManua.ls Logo

New Holland TD60D - Removing the Alternator

New Holland TD60D
610 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
SECTION 55 -- ELECTRICAL SYSTEM -- CHAPTER 4
603.54.471.00 -- 11 -- 2004
REMOVAL, REASSEMBLY AND
SERVICING (Op. 55 301 10)
IMPORTANT NOTE: Before disconnecting the
alternator wires, check that the ignition key is in the
OFF position.
REMOVING THE ALTERNATOR
See figures 10 and 11.
1. Disconnect the negative battery cable.
2. Disconnect B+ (1) and D+ (2) wires from the
alternator.
10
26648
11
1. Slacken and remove the nut and bolt (3)
securing the alternator to the belt tensioner (4).
2. Move the alternator to reduce belt tension (5)
and remove it from the alternator pulley (6).
3. Unscrew and remove the nut and bolt (7).
Remove the alternator.
26649

Table of Contents

Other manuals for New Holland TD60D

Related product manuals