2.5 Calibration
DF1906
To make full use of a variety of functions of the equipment safely, reading through the instruction
manual at least once is recommended.
2.5 Calibration
Perform the performance test described in "7.5 Performance Test" at least once every year for the
DF
1906, which may vary depending on the operating environment and frequency.
Furthermore, it is recommended to perform the performance test before using the equipment for
important measurements and tests.
If the performance test results do not satisfy the standards, NF Corporation will perform adjustment or
calibration to restore the original performance.
If calibration is required, contact NF Corporation or one of our agents.
Charges apply for the calibration service.
To Next Page
Loading...
