Nibe FIGHTER 1140 - Alarm Log

Service menus
57
FIGHTER 1140
Alarm log
Menu 9.10 Return
Pressing the enter button returns you to menu 9.0.
Return
9.5.17
Menu 9.5.17 Return
Pressing the enter button returns you to menu 9.5.
Return
9.10
Menu 9.9 Reset alarm
Alarms are reset in this menu.
Reset alarm
9.9
Menu 9.5.0 — 9.8.0 Alarm log 1 — 4
The alarm logs are shown in the sub-menus of this
menu. Log 1 is the last alarm, log 2 the next last, etc.
Log 1.
9.5.0
S
Menu 9.5.1 Time
Menu 9.5.2 Alarm type
Alarm type Cause
1 HP alarm
2 LP alarm
3 MS alarm
4 High Hotgas
5 Incorrect phase sequence
6 TB alarm
7 Low KB alarm
8 Ext KB alarm
9 High VBF1
10 Sensor fault VBF2
11 Sensor fault VBF1
12 Sensor fault VVM
13 High VVM
14 High VBR1
15 Sensor fault PNN
16 Sensor fault KBut
17 Sensor fault HG
18 Sensor fault VBR2
19 Sensor fault UG
20 Sensor fault VBR1
21 Sensor fault KF
22 High KF
23 High Hotgas
24 Sensor fault Pool
Menu 9.5.3 Charging type
Menu 9.5.4 Brine In
Menu 9.5.5 Brine Out
Menu 9.5.6 Outdoor temp.
Menu 9.5.7 Flow temp.
Menu 9.5.8 Return temp.
Menu 9.5.9 Hot water temp.
Menu 9.5.10 Hot gas temp.
Menu 9.5.11 Compr. time
Menu 9.5.12 Electric b. time
Menu 9.5.13 Relay register 1
Menu 9.5.14 Relay register 2
Menu 9.5.15 External input
Menu 9.5.16 Reset log