Nikon D100 VBA10201 User Manual

VBA10201-R.3577.A
- A41
･
-
[How to install the Windows98SE driver]
(1) Connect the camera to PC with the USB cable.
(2) "New hardware addition wizard" starts. Select "Specify the driver place" and click "Next".
(3) Specify the setup information (INF le ndcStor. inf) and register it.
6. How to use
(1) Execute "Q50ImageAdjustENG.EXE", and the main menu starts. (Refer to Fig. 1.)
(2) Select an item to be executed in "Contents".
* Before performing "Sensitivity adjustment", "CCD GrGb level compensation adjustment" and "Color
sensitivity ratio adjustment", acquire the reference values by using a reference body.
(3) Click the START button with the mouse. The selected item is executed.
(4) Hereafter, make adjustment according to the instructions on the screen.
(5) To end the adjustment, click "X" on the upper right on the main menu with the mouse.
Fig.1

Nikon D100 VBA10201 Specifications

General

Brand	Nikon
Model	D100 VBA10201
Category	Digital Camera
Language	English