optional Image Authentication software. This is needed
by anyone who wants to ensure that an image has not
been modified.
▪ Copyright information (D300S only) – On the D300S
only, you can add two items of information including the
Artist (34 characters) and Copyright (54 characters).
Designed for those using their images commercially, this
function allows you to embed specific identity
information into the picture’s internal metadata.
▪ Save/load settings – Allows you to save the current
menu configuration of most internal camera settings to a
memory card for transfer to a computer. You can back
up complex configurations and restore them to the
camera when needed.
▪ GPS – If you own a GPS that can be connected to the
Nikon D300(S)—such as the Accessory shoe-mounted
Nikon GP-1 or another GPS unit—you can record
Latitude, Longitude, Altitude, Heading, and UTC
(Coordinated Universal Time) into the metadata of each
image.
▪ Virtual horizon (D300S only) – This function displays
a virtual horizon on the camera’s Monitor. This display
shows tilt to the left or right, but not forward or back.
▪ Non-CPU lens data – Lets you select from a series of
nine non-CPU lenses, such as AI/AI-S Nikkors from the
1970s and ‘80s. Each lens is registered within the camera
with its own number for later selection at time of use.
▪ AF fine tune –
431
To Next Page
Loading...
