Wireless Transmitter
(User’s Manual – D300S page 227; D300 page 229)
This menu system is concerned with having the WT-4
wireless transmitter attached to the D300(S). Using the WT-4,
you can send images wirelessly to a computer or printer. You
can also use Nikon’s Camera Control 2.x software to control
the D300(S) remotely.
Here are the four modes found in the D300(S) with a WT-4
attached:
▪ Transfer mode – Using this mode, you can upload new
or existing images to a computer or even to a File
Transfer Protocol (FTP) server.
▪ Thumbnail select mode – This allows someone to
preview images you are shooting on a remote computer.
If they like the image(s), they can upload just the one(s)
they like to the computer. Sports shooters love this!
▪ PC mode – This might have been called “Studio Mode”
instead. It allows a studio artist to control their D300(S)
from a computer using the Nikon Camera Control Pro
2.x software.
▪ Print mode – This allows someone shooting near a
network to have the images printed on a printer
connected to one of the network computers.
Be sure that you select the camera’s MTP/PTP USB mode
(see USB (D300 only) section) before attaching a WT-4
481
To Next Page
Loading...
