Nikon D300 - Page 698

Figure 10-13. Controls to use WB bracketing
Here are the steps to set up WB Bracketing:
1. Set Custom setting e5 to WB bracketing (see
Figure 10-12).
2. Use the controls shown in Figure 10-13 to control the
WB brackting process. Please note that you must have
previously assigned the Fn (Func) button + dials to Auto
bracketing (BKT) with Custom setting F5 (D300S) or
Custom setting f4 (D300). If you assigned a different
button to WB bracketing, use it instead.
Choose the number of shots in the bracket (up to nine
shots total) by pressing and holding the Fn (FUNC.)
button while turning the Main command dial left or right
(Figure 10-13, images 1 and 2). See Figure 10-14 as a
reference for the values you will set with these controls.
Here is a table of values that you can select in the
position shown as 3F in Figure 10-14. These values are
the number of shots and bracketed color shift
increments. For instance, if you bracket for 7F, you’ll
have one normal exposure, three with increasing
amounts of blue and three with increasing amounts of
amber:
698