the time, but I check as I’m focusing to make sure I am using
the AF point I want to use. I can use the Multi Selector to
move a single AF point, or a group of points, around the array
of 51 available points.
Figure 11-2. (1) Focus mode selector, (2) Release mode dial
and lock release button, (3) AF-area mode selector, and (4)
Multi Selector
Be aware that 15 of the 51 AF points on the D300(S) are
cross-type sensors, which means that they will initiate focus
in either a horizontal or a vertical direction. The center three
columns by five rows of AF points are cross-type. All AF
points outside of the three center columns are only sensitive
in a horizontal direction. Figure 11-3 shows the AF points
that are cross-type in red.
714
To Next Page
