Nikon D3S - Page 189

163
r
❚❚ Copying White Balance from d-0 to Presets d-1–d-4
Follow the steps below to copy a measured value for white
balance from d-0 to any of the other presets (d-1–d-4).
1 Select L (Preset
manual) for White
balance in the
shooting menu.
Press the G button and
select White balance in
the shooting menu.
Highlight Preset manual and press 2.
2 Select a destination.
Highlight the destination
preset (d-1 to d-4) and press
the center of the multi
selector.
3 Copy d-0 to the selected
preset.
Highlight Copy d-0 and press
J.
If comment has been
created for d-0 (0 168), the
comment will be copied to
the comment for the selected preset.
G button