39
s
Format the Memory Card
Memory cards must be formatted before first use or after being
used or formatted in other devices.
1 Turn the camera on.
2 Press the Q buttons.
Hold the Q (I and O)
buttons down simultaneously
until a blinking C appears
in the shutter-speed displays
in the top control panel and
viewfinder. If two memory
cards are inserted, the card in
slot 1 (0 37) will be selected;
you can choose the card in
slot 2 by rotating the main
command dial. To exit without
formatting the memory card,
wait until C stops blinking
(about six seconds) or press any button other than the Q
(I and O) buttons.
3 Press the Q buttons again.
Press the Q (I and O) buttons together a second time
while C is blinking to format the memory card.
Do not
remove the memory card or remove or disconnect the power
source during formatting.
D Formatting Memory Cards
Formatting memory cards permanently deletes any data they may contain.
Be sure to copy any photographs and other data you wish to keep to a
computer before proceeding (0 254).
O button I button
SHOOT
To Next Page
Loading...
