Nikon D3S - Control Panel

194
l
❚❚ Choosing a Flash Mode
To choose the flash mode, press
the M button and rotate the main
command dial until the desired
flash mode is selected in the top
control panel:
1 Available only in exposure modes e and g. In modes f and h, slow sync
becomes front-curtain sync.
2 In exposure modes e and g, flash-sync mode will be set to slow
rear-curtain sync when the M button is released.
3 Y icon blinks if flash unit does not support red-eye reduction.
4 Red-eye reduction with slow sync is available only in exposure
modes e and g.
In modes f and h, red-eye reduction with slow sync
becomes red-eye reduction.
M button Main command
dial
Red-eye reduction with
slow sync
3, 4
Red-eye reduction
3
Front-curtain sync Slow sync
1
Rear-curtain sync
2