186
l
Using a Flash
The camera supports the Nikon Creative Lighting System (CLS) and
can be used with CLS-compatible flash units.
Optional flash units
can be attached directly to the camera accessory shoe as described
below.
The accessory shoe is equipped with a safety lock for flash
units with a locking pin, such as the SB-900, SB-800, SB-600, and
SB-400.
1 Remove the accessory shoe cover.
2 Mount the flash unit on the
accessory shoe.
See the manual provided with the flash
unit for details.
A The Sync Terminal
A sync cable can be connected to the sync
terminal as required.
Do not connect another
flash unit via a sync cable when performing rear-
curtain sync flash photography with a flash unit
mounted on the camera accessory shoe.
To Next Page
Loading...
