212
t
❚❚ Pausing Interval Timer Photography
Interval time photography can be paused by:
•Pressing the J button between intervals
• Highlighting Start > Pause in the interval timer menu and
pressing J
• Turning the camera off and then on again (if desired, the
memory card can be replaced while the camera is off)
• Selecting self-timer (E) or mirror-up (M
UP) release modes
•Pressing the a button
To resume shooting:
1 Choose a new starting
trigger.
Choose a new starting trigger
and start time as described on
page 208.
2 Resume shooting.
Highlight Start > Restart and
press J.
Note that if interval
timer photography was paused
during shooting, any shots
remaining in the current
interval will be canceled.
To Next Page
Loading...
