218
t
❚❚ Other GPS Units
Garmin GPS units that conform to version 2.01 or 3.01 of the
National Marine Electronics Association NMEA0183 data format
can be connected to the camera’s ten-pin remote terminal using
an MC-35 GPS adapter cord (available separately; 0 376).
Operation has been confirmed with Garmin eTrex and Garmin
geko series devices equipped with a PC interface cable connector.
These devices connect to the MC-35 using a cable with a D-sub
9-pin connector provided by the manufacturer of the GPS device.
See the MC-35 instruction manual for details.
Before turning the
camera on, set the GPS device to NMEA mode (4800 baud).
MC-35
To Next Page
Loading...
