Nikon D3S - Page 395

369
n
A Compatible Non-CPU Lenses
If lens data are specified using Non-CPU lens data (0 214), many of the
features available with CPU lenses can also be used with non-CPU
lenses.
If lens data are not specified, color matrix metering can not be
used, and center-weighted metering is used when matrix metering is
selected.
Non-CPU lenses can only be used in exposure modes g and h, when
aperture must be set using the lens aperture ring. If the maximum
aperture has not been specified using Non-CPU lens data, the camera
aperture display will show the number of stops from maximum
aperture; the actual aperture value must be read off the lens aperture
ring.
Aperture-priority auto will be selected automatically in exposure
modes e and f.
The exposure-mode indicator (e or f) in the top control
panel will blink, and g will be displayed in the viewfinder.
D Incompatible Accessories and Non-CPU Lenses
The following can
NOT be used with the D3S:
• TC-16AS AF teleconverter
•Non-AI lenses
• Lenses that require the AU-1 focusing
unit (400mm f/4.5, 600mm f/5.6,
800mm f/8, 1200mm f/11)
• Fisheye (6mm f/5.6, 7.5mm f/5.6,
8mm f/8, OP 10mm f/5.6)
•2.1cm f/4
•Extension Ring K2
• 180–600mm f/8 ED (serial numbers
174041–174180)
• 360–1200mm f/11 ED (serial numbers
174031–174127)
• 200–600mm f/9.5 (serial numbers
280001–300490)
• AF lenses for the F3AF (AF 80mm
f/2.8, AF 200mm f/3.5 ED,
AF Teleconverter TC-16)
• PC 28mm f/4 (serial number 180900
or earlier)
• PC 35mm f/2.8 (serial numbers
851001–906200)
• PC 35mm f/3.5 (old type)
• Reflex 1000mm f/6.3 (old type)
• Reflex 1000mm f/11 (serial numbers
142361–143000)
• Reflex 2000mm f/11 (serial numbers
200111–200310)