Nikon Z 7 - F4: Shutter Spd & Aperture Lock; F5: Customize Command Dials

279Menu Guide > A Custom Settings
Selecting On for Shutter speed lock locks shutter speed at the
value currently selected in mode S or M. Selecting On for
Aperture lock locks aperture at the value currently selected in
mode A or M. While shutter speed or aperture lock is in effect, a O
icon will be displayed. Shutter speed and aperture lock are not
available in mode P.
Customize the operation of the main and sub-command dials.
• Reverse rotation: Reverse the direction of
rotation of the command dials for
selected operations. Highlight options
and press 2 to select or deselect, and
then press J to save changes and exit.
• Change main/sub: Choose the roles played by the command dials
for exposure and focus operations.
- Exposure setting: If On is selected, the main command dial will
control aperture and the sub-command dial shutter speed. If
On (Mode A) is selected, the main command dial will be used
to set aperture in mode A only.
- Autofocus setting: This option applies to the control assigned
Focus mode/AF-area mode using Custom Setting f2
(Custom control assignment). If On is selected, the focus
mode can be chosen by keeping the control pressed and
rotating the sub-command dial, AF-area mode by keeping
the AF-mode button pressed and rotating the main
command dial.
f4: Shutter Spd & Aperture Lock
G button ➜ A (Custom Settings menu)
f5: Customize Command Dials
G button ➜ A (Custom Settings menu)