47
APPENDIX
D.
Parts Replacement
This printer is designed to provide excellent performance over time. In order to maintain your
printer in peek performance, several parts should be replaced on a periodic basis. The following
table outlines these parts and the suggested replacement time frame:
PART NUMBER OF PRINTS TOOLS NEEDED
Input Roller Every 20,000 prints N/A
Print Head Every 20,000 prints Firmware Update Utility
Filter Replacement Every 6 months Phillips screwdriver
D-1 Replacing the Input Rollers
1. Open the front access panel by depressing the release button.
Figure D-1: Open front access panel
To Next Page
Loading...
