Nisca PR5350 - Electrical Requirements; Physical Requirements; Environmental Requirements

3
• The printer does not operate normally or exhibits a distinct change in
performance.
1.5.1 Electrical Requirements
The PR53xx series printer requires the following electrical specifications for optimal
performance:
 100-240 VAC at 50/60 Hz. The printer is auto-switching to power within this range.
 Single phase, 3-wire grounded receptacle.
 If you use an extension cord with the printer, verify it’s rated for a minimum of 125
VAC, 10 Amps.
Warning
Never operate the printer in a location where the operator, computer, or
printer can get wet. Personal injury could result. The printer must be
connected to a grounded electrical power supply and properly protected
against electrical surges and grounding faults.
1.5.2 Physical Requirements
The PR53xx series printer requires a sturdy platform that can accommodate its weight and
physical dimensions. The printer weighs 26.6 pounds (13 kilograms). The dimensions are:
 Height: 16.57” (421 mm)
 Width: 10.66” (271 mm)
 Depth: 10.03” (331 mm)
1.5.3 Environmental Requirements
The PR53xx series printer requires the following environmental conditions for optimal operation:
 Operating temperature range of 50° – 95°
F (10° – 35° C). To ensure best performance,
temperatures should be in the range of 68° – 77° F (20° – 25° C).
 Operating relative humidity range of 35% – 80% non-condensing.