Configure a G-240W-C indoor ONT
112
7368 ISAM ONT G-240W-C Product Guide
3FE-46256-AAAA-TCZZA Issue: 01
Procedure 28 Firewall configuration
1 Select Security > Firewall from the top-level menu in the GPON Home Gateway window, as
shown in Figure 48.
Figure 48 Firewall window
Four security options are available: Low, High, Off, and Advanced.
Low—All outbound traffic and pinhole-defined inbound traffic is allowed
High—Traffic denied inbound and minimally permit common services outbound
Off—All inbound and outbound traffic is allowed
Advanced—Advanced firewall configuration applies as specified
Table 38 describes the fields in the firewall window.
Table 38 Firewall parameters
2 Configure the firewall.
Field Description
Security level Choose the security level from the drop-down menu: Low, High, Off, or
Advanced
Attack Protection
(Protection against DoS or
DDoS attacks)
Choose enable or disable attack protection from the drop-down menu
The default is enable
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
