7368 ISAM ONT G-240W-C Product Guide Configure a G-240W-C indoor ONT
Issue: 01 3FE-46256-AAAA-TCZZA 153
3 Click Save.
4 STOP. This procedure is complete.
Procedure 60 LOID configuration
1 Select Maintenance > LOID Config from the top-level menu in the GPON Home Gateway
window, as shown in Figure 79.
Figure 79 LOID configuration window
2 Enter the LOID.
3 Enter the password, if applicable.
4 Click Save/Apply.
5 STOP. This procedure is complete.
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
