7368 ISAM ONT G-240W-C Product Guide Configure a G-240W-C indoor ONT
Issue: 01 3FE-46256-AAAA-TCZZA 119
4 Configure DMZ.
5 Click Save DMZ.
6 STOP. This procedure is complete.
Procedure 34 Access control configuration
This procedure describes how to configure the access control level (ACL).
1 Select Security > Access Control from the top-level menu in the GPON Home Gateway
window, as shown in Figure 54.
Figure 54 Access Control window
Table 44 describes the fields in the Access Control window.
Note 1 — ACL takes precedence over the firewall policy.
Note 2 — The trusted network object will be shared for all WAN
connections; it is not applied individually to a WAN connection.
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
