7368 ISAM ONT G-240W-C Product Guide Configure a G-240W-C indoor ONT
Issue: 01 3FE-46256-AAAA-TCZZA 87
2 Select the mode for each port.
3 Click Save.
4 Enter the DHCP configuration information.
5 Click Save.
6 Enter the Static DHCP information.
7 Click Add.
You can also use this panel to delete a Static DHCP MAC address or IPv4 address.
8 STOP. This procedure is complete.
Subnet Mask Subnet mask of the ONT
DHCP enable Select this checkbox to enable DHCP
DHCP Start IP Address Starting DHCP IP address
DHCP End IP Address Ending DHCP IP address
DHCP Lease Time DHCP lease time (in min)
Primary DNS Primary DNS identifier
Secondary DNS Secondary DNS identifier
Static DHCP Entry
MAC Address MAC address for the static DHCP
IPv4 Address IPv4 address for the static DHCP
Field Description
(2 of 2)
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
