Configure a G-240W-C indoor ONT
114
7368 ISAM ONT G-240W-C Product Guide
3FE-46256-AAAA-TCZZA Issue: 01
4 Click Add.
5 STOP. This procedure is complete.
Procedure 30 IP filter configuration
1 Select Security > IP filter from the top-level menu in the GPON Home Gateway window, as
shown in Figure 50.
Figure 50 IP filter window
Table 40 describes the fields in the IP filter window.
Table 40 IP filter parameters
Field Description
Enable IP Filter Select this checkbox to enable an IP filter
Mode Choose an IP filter mode from the drop-down menu:
• Drop for upstream
• Drop for downstream
Internal Client Choose an internal client from the drop-down menu:
• Customer setting - uses the IP address input below
• IP - uses the connecting devices' IP to the ONT
Local IP Address Local IP address
Source Subnet Mask Source subnet mask
Remote IP Address Remote IP address
(1 of 2)
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
