7368 ISAM ONT G-240W-C Product Guide Configure a G-240W-C indoor ONT
Issue: 01 3FE-46256-AAAA-TCZZA 125
Procedure 38 NTP configuration
1 Select Application > NTP from the top-level menu in the GPON Home Gateway window, as
shown in Figure 58.
Figure 58 NTP window
Table 48 describes the fields in the NTP window.
Table 48 NTP parameters
Field Description
Enable NTP Service Select this checkbox to enable NTP service
Current Time Enter the current local date and time
Primary Time Server Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
Secondary Time Server Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
Third Time Server Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
Interval Time Interval at which to get the time from the time server, in seconds
(1 of 2)
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
