Configure a G-240W-C indoor ONT
128
7368 ISAM ONT G-240W-C Product Guide
3FE-46256-AAAA-TCZZA Issue: 01
Table 49 describes the fields in the USB window.
Table 49 USB parameters
2 Configure USB.
3 Click Save.
4 STOP. This procedure is complete.
Field Description
Enable FTP server Select this checkbox to enable using an FTP server
Username Username for the FTP server
Password Password for the FTP server
Re-enter Password Password for the FTP server
Enable SFTP server Select this checkbox to enable using an SFTP server
Enable SFTP for Remote Access Select this checkbox to enable SFTP for remote access
Username Username for the SFTP server
Password Password for the SFTP server
Re-enter Password Password for the SFTP server
Enable Samba server Select this checkbox to enable using a Samba server
Workgroup Enter the Samba server workgroup
Samba Username Username for the Samba server
Samba Password Password for the Samba server
Re-enter Samba Password Password for the Samba server
Enable Printer Sharing Select this checkbox to enable printer sharing
Printer sharing is disabled by default
Connected USB devices For each printer that is connected to the ONT, the following fields are
displayed:
• Host Number for example: Printer1, Printer2
• Device Name: name or identification for the USB device
• Format: for a USB printer, the printing protocol is RAW; for a USB
storage device, this field displays the storage format
• Total space (applies only to a USB storage device)
• Free space (applies only to a USB storage device)
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
