Configure a G-240W-C indoor ONT
126
7368 ISAM ONT G-240W-C Product Guide
3FE-46256-AAAA-TCZZA Issue: 01
2 Configure NTP.
3 Click Save.
4 STOP. This procedure is complete.
Procedure 39 USB configuration
You can connect USB storage devices and USB printers to the USB ports of the device. The USB
menu enables you to configure FTP, SFTP, and Samba servers for your USB storage devices.
You can also use the USB menu to enable and disable USB printer sharing across clients on the
LAN.
The USB connected devices are shown in overview table on the bottom of the USB window.
The device incorporates a CUPS server to enable USB printer sharing across the LAN by using
the RAW print-through protocol. When a USB printer is connected to the device, it can be
configured on LAN clients by referring to
http://<hostname>:631/printers/<printer_name>
Time Zone Choose the local time zone from the drop-down menu
Field Description
(2 of 2)
Note — Due to image size limitations, some OLTs may not be able to
support the Samba server feature.
For this reason, two types of ONT software images are available: the
Premium Image supports the FTP, SFTP, and Samba features; the
Advanced Image supports the FTP and SFTP features but does not
support the Samba server feature.
For more information, contact your Nokia representative.
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
