Nokia 7368 ISAM ONT G-240W-C - Figure 51 Parental Control Window

7368 ISAM ONT G-240W-C Product Guide Configure a G-240W-C indoor ONT
Issue: 01 3FE-46256-AAAA-TCZZA 123
2 Configure port triggering.
3 Click Add.
4 STOP. This procedure is complete.
Procedure 37 DDNS configuration
1 Select Application > DDNS from the top-level menu in the GPON Home Gateway window, as
shown in Figure 57.
Figure 57 DDNS window
Table 47 describes the fields in the DDNS window.
Open Protocol Choose the open port protocol from the drop-down menu:
• TCP
• UDP
• TCP/UDP
Trigger Protocol Choose the triggering port protocol from the drop-down
menu:
• TCP
• UDP
• TCP/UDP
Enable Triggering Select this checkbox to enable port triggering
WAN Connection List Choose a WAN connection from the drop-down menu
Note: only active devices are shown on this menu
Field Description
(2 of 2)
Release 06.01.00 | March 2019 | Edition 12